RS Machinery Ltd Hire & Sales

24/10/2026

Wacker Neuson DV90 9t Dual View Swivel Dumper | £27000

Well-equipped machine with practical setup.

3,896 hours; 4x4 drive, hydrostatic transmission, swivel tipping.
4-cylinder Deutz turbo diesel, 55.4 kW.
Dual View with full heated cab and Multi-View camera.
Road kit, pin pad immobiliser, towing bracket, automatic lubrication; good tyres.
Max payload 9,000 kg; operating weight 5,444 kg; 4891 x 2453 x 2945 mm.

More photos and details:
https://blog.rsmachinery.eu/product/wacker-neuson-dv90-9t-dual-view-swivel-dumper/

Sales Department

Brett Clembintson
+44 7483 062888
mailto:[email protected]

Tomasz Baryla
+44 74830 62889
[email protected]

24/10/2026

Small rollers. Big difference by Friday.

Tight footpaths, narrow drives, reinstatement in busy streets — this is where an 800mm double drum quietly saves hours of hand-tamping. It slips through awkward gateways, compacts right up to edges, and actually fits on the trailer you’re already using.

On wet, gloomy afternoons, the water system and working lights keep the finish tidy and the job moving. The sort of kit crews ask for again because it made last week less awkward. Full machine write-up below.

Hamm HD 8 VV 1.6t Roller – RS Machinery BlogThere are plenty of machines on a construction site that make a lot of noise about their importance, and then there are compact rollers like the Hamm HD 8 VV, which tend to get on with the work without much fuss. This 1.6 tonne double drum […]

23/10/2026

126 machines in stock. Plenty to choose from. 🚜

23/10/2026

JCB 541-70 7m Telehandler | £22,600

Ready for work straight away.

4x4x4 driveline with Powershift transmission; 6,549 hours.
4-cylinder JCB Turbo Diesel 81.0 kW engine.
Maximum lift capacity 4,100 kg; maximum lift height 7.0 m.
Full heated cab with air conditioning, radio, joystick control, and pin pad immobiliser.
Windscreen guard, front and rear work lights, and good tyres.
Dimensions 4,990 x 2,230 x 2,490 mm; operating weight 8,060 kg.

More photos and details:
https://blog.rsmachinery.eu/product/jcb-541-70-7m-telehandler/

Sales Department

Brett Clembintson
+44 7483 062888
mailto:[email protected]

Tomasz Baryla
+44 74830 62889
[email protected]

23/10/2026

Tight sites. Real loads. No drama.

A 1‑tonne high tip that slips through gateways, feeds skips and keeps spoil moving when space and patience are short. 4x4 and hydrostatic make sense on wet Tuesdays and stop‑start runs. It’s about controlled shuttles, not tearing around.

If you’ve ever watched a barrow sink by lunchtime, you’ll know why these earn their keep quietly.

Full machine write-up below.

Belle DX 1000 HT 1 Ton High Tip DumperThere are plenty of jobs where a full-sized dumper is simply more machine than the site will comfortably take. Narrow entrances, garden access, half-finished groundworks, small developments, farm tracks and cramped urban plots all have a habit of making bigger k...

22/10/2026

Kubota KX027-4 2.7t Mini Excavator | £17,900

Well-equipped machine with practical setup.

Powered by a 4-cylinder Kubota diesel rated at 17.5 kW.
Showing 2,714 hours.
Quick hitch with 3 buckets included.
Fitted with auxiliary hydraulic circuit piping and twin speed tracks.
Full cab with immobiliser, red key and work lights.
Max digging depth 2,490 mm; operating weight approx. 2,665 kg.

More photos and details:
https://blog.rsmachinery.eu/product/kubota-kx027-4-2-7t-mini-excavator-4/

Sales Department

Brett Clembintson
+44 7483 062888
mailto:[email protected]

Tomasz Baryla
+44 74830 62889
[email protected]

22/10/2026

Tight gateways don’t care how big your digger is.

This JCB’s sub-one-metre width turns side passages and garden corners from chaos into progress. It cuts the hand-digging and keeps jobs moving when the ground’s wet. Quietly useful kit that saves backs and time.

Full machine write-up below.

JCB 15C-1 Mini Excavator – RS Machinery BlogThe JCB 15C-1 Mini Excavator is the sort of compact machine that makes immediate sense to anyone who spends time working around restricted access, small plots, utility trenches, garden walls, farmyards, extensions and those awkward corners of site where ...

21/10/2026

Bag Filling Bucket for JCB and Manitou Telehandler | £1500

Ready for work straight away.

Bag filling bucket attachment for telehandlers.
Compatible with JCB and Manitou telehandler models.
Bucket configuration for bulk bag filling applications.
Attachment providing bagging capability for a telehandler.

More photos and details:
https://blog.rsmachinery.eu/product/bag-filling-bucket-for-jcb-and-manitou-telehandler/

Sales Department

Brett Clembintson
+44 7483 062888
mailto:[email protected]

Tomasz Baryla
+44 74830 62889
[email protected]

21/10/2026

Tight gates. Soft lawns. Still needs digging.

This is where a 1.7‑tonner like JCB’s 16C‑1 earns its keep. Squeezes through 980 mm gateways, then widens out to feel planted. Fewer barrow runs, less hand digging, and the job keeps moving when the ground’s wet.

Twin‑speed tracks matter when you’re hopping between trench and heap all day. Quick hitch on, bucket off, no drama. And a heated cab makes a wet Tuesday survivable.

Full machine write-up below.

JCB 16C-1 Mini Excavator – RS Machinery BlogThere is a particular kind of job where a full-sized excavator becomes more of a hindrance than a help. Narrow entrances, soft ground, garden walls, roadside verges, farm tracks, cramped renovation sites and those awkward corners of a job where there nev...

20/10/2026

Our CEO Rafał Sykut will be speaking at the British Polish Construction Forum 2026 at the Institute of Directors in London.

Topic: Buy, hire or outsource? Making smarter machinery decisions as your construction business grows.

If you're in construction and thinking about how to manage your equipment as your business scales — worth attending.

📍 116 Pall Mall, London
🗓 Friday 13 November | 9:30 – 15:00

Link in comments.

Buy, hire or outsource?
Every growing construction business faces this question at some point. 🚜

We're pleased to announce Rafał Sykut from RS Machinery as one of our speakers at the British Polish Construction Forum 2026! Rafał will be bringing his industry experience to a session titled "Buy, hire or outsource? Making smarter machinery decisions as your construction business grows".

🎟️ Secure your ticket: https://hubs.li/Q04yrl990

Investing in equipment is a significant business decision, and there's plenty to consider when choosing how to support your next stage of growth.

📅 Friday 13 November 2026
📍 Institute of Directors, 116 Pall Mall, London

We're looking forward to hearing Rafał's perspective and bringing more practical business conversations to the Forum.